Polymer clay angel wings

This is my first try at angel wings.  I was inspired by a picture I saw online. I drew out a basic shape in paper and made two wings, then just added long feathers and the center fluff feathers.

They have a sort of metallic look and that is what I was striving for; sort of a distressed silver.

I am not sure about the necklace – I think it should be hanging from another type of necklace, but I don’t know what.

My next goal is to make a better set of wings and then make a mold.  These took about 2 hours + baking – I think it took about 4 bakings – with different layers and adding the center piece (with the ring) and putting on a back clay covering for a finished look.

Polymer Clay owl

Here is my latest creature.  I was inspired by my memories of the 1960’s owls that seem to be coming back into vogue.

I used a blend of golds, browns, etc.  Mostly scrap clay blended together, then layer by layer built up his face and feathers.

After multiple bakings, I used a golden paint to highlight the details.  This second picture shows the back with two ways to hang it; By pin or neck chording.  Still not sure what I want to use for the necklace.  It needs to be substantial.

This will probably be worn in the fall or winter.  It’s not really suited for summer.

Here is the back view.  The color in this shot isn’t really right, but couldn’t fix it.  The color is more true in the first picture.

In honor of the new year and all things celestial, I have created a Moon and Sun pin set.  Using my new molds that my DH bought me for Christmas, I made these two pins.  The molds are Maureen Carlsons, made for AMACO.  I read somewhere, or saw her on the Carol Duval showing how to change the faces to be different, so they have different personalities.  You can play with the eyes, noses and mouths to give varying effects.

I curved the moon ends more to suit my taste and added a hole at the top so I cold hang a star.  There are stars that come with the Moon mold set, and before I baked one, I put a hole in it to accommodate the chain links.

Also, prior to baking I put color on the raw clay with Pearlex Powders.  I used a little water to make a paste of the powder for the Sun’s eye shadow, and her cheeks.  The pictures don’t show the depth of color, but I think they give the face life.  After baking I put on two thin coats of verathane floor wax to keep the powders from rubbing off.  I have not yet done this on the Moon.

I know it won’t show up in the picture, I put a little face on the back of the flat glass marble (using glass paint) before adding the usual silver paint which gives the marble a mirror like effect.    You can only see the face in the head of the angel if you look close and turn it slightly.

I used a gold mixture of clay for the whole thing, but before baking I brushed on Gold Pearl Ex powder to the hair, and Micro Pearl on the rest, making it look silver/white.

After the first baking I will put a back and hanging mechanism at the top…then it will bake again.  After I was done, I put a gold ribbon at the top to hang it with.

I ran accross this picture from a few years ago and wanted to add it to my blog as a reminder.  It was a fairly easy one.  Extrude a snake of green clay.  Roll a small brown clay base and put it at the bottom then start laying out the snake in a tree shape.  I cut a small star from yellow clay and put it at the top, and added little balls of color around into the holes for decoration.  I am sure you can think of more ways to decorate it.  This would also make a cute pin.   I added a little wire hanger to the back before it was baked…with, I think, another gold star.  I remember putting gold ‘rub-n-buff’ on the high spots after it was baked.

The little candy canes are just white and red snakes rolled together and make very thin.  then cut and turned onto a baking tile.  I just hung them onto a miniature Christmas tree without adding holders, they go right over the branches.

I got an inspiration last night and turned out this pin.  Finished it today, putting a back on it and even got to wear it to a meeting.  I think the finish looks better in person, as I brushed on Pearlex Powders before baking, and it leaves a nice sheen to the leaves.   As far finding inspiration ?…,  just pick up any magazine with Christmas stuff and something will come to you, I am sure!  Again I used my favorite – flat marbles with silver rub n buff on the back.  Let it dry, then place on a sheet of clay, …then I cut out the three leaves and placed them where I thought they looked good.  Also, I tried making some smaller than usual snakes with my extruder and wrapping them around the leaves….?? see the one in the center? for a little suprise….  Hope you like it.

I just found a great tutorial from Nancy Lotzer on balanese filagree, the bowl idea is really cool!  Can’t wait to try my hand at this.  The way she used the garlic press is very inventive!  Her kaleidescope canes are beautiful. [Link]

Although time consuming, it is easy…another example of balanese filagree as inspired by Donna Kato.  On a circle cut out, I started making coils with an extruder and cutting little bits and rolling them for the balls then slowly the design emerged.  I believe I used some liquid clay to adhear the elements, and probably baked this 3 times before it was finished.   It is about 2 inches wide, and the pin back is embedded into clay and baked on the back.

I know it isn’t much of a post, but as I was talking about using a cookie cutter yesterday to make a polymer clay Christmas tree ornament, I thought this site was a good one for future reference.

The snowflake cookie cutters are a definate for next year for me.  ?? Santa are you listening ??

Go to the Sculpey website too and look at their version of a snowflake using these cutters.